Electron Microscopes
Electron Microscopy Sciences Gilder Hexagonal 75 mesh Nickel Grid
A reliable support specimen grid source. Features: well-defined grid bars, maximum open area, and a matt/shiny side. Each grid is individually inspected. The copper grids with palladium plating offers better grid strength and avoids tarnishing. 3.05 mm diameter, 0.7 mil (18um) thickness.
Grid: Nickel
Pitch: 340 µm
Hole: 290 µm
Bar: 50 µm
Electron Microscopy Sciences Gilder Parallel Bar Grid G75P, Gold
Gilder grids are a reliable support specimen grid for transmission electron microscopy. They feature a well-defined grid bars, maximum open area, and a matt/shiny side. Each grid is individually inspected.
Material: Gold
Pitch: 340 µm
Hole: 270 µm
Bar: 70 µm
Electron Microscopy Sciences Gilder Single Slot Oval Grid G102, Nickel, 1000 x 200 µm Slot
Single Slot TEM Grids with oval holes have a thickness of are 50 microns. Each grid is individually inspected.
Material: Nickel
Slot: 1000 x 200 µm
Electron Microscopy Sciences Gilder Aperture Grid with Single 75 µm hole, Gold
Single Slot aperture grids have a thickness of are 50 microns. Aperture diameter is 75 um.
Material: Gold
Electron Microscopy Sciences EMS Molybdenum Aperture with 30 µm hole, 2 mm O.D., 0.53 mm thick
Molybdenum disc aperture with 30 um hole for use with Cambridge, Siemens, JEOL, and Cameca electron microscopes.
O.D.: 2 mm
Thickness: 0.53 mm
Electron Microscopy Sciences EMS Molybdenum Aperture with 70 µm hole, 3 mm O.D., 0.12 mm thick
O.D.: 3 mm
Thickness: 0.12 mm
Electron Microscopy Sciences Standard Pin SEM Stub Slotted 2-1/2" Head, 3/8" Pin, Aluminum, 3.2 mm Pin diameter
Slotted head scanning electron microscope (SEM) mount for use with AMRAY, Cambridge, Leica, ZEISS/LEO, FEI/Philips, CamScan, and Tescan microscopes.
Head: 2.5"
Pin height: 3/8"
Pin diameter: 3.2 mm
Electron Microscopy Sciences Hitachi M4 SEM Cylinder Mount 1-1/4" surface with 12 Divisions, 1/4" height, Aluminum
Hitachi M4 Thread SEM mounts made from lathe finished ultra-pure aluminum.
Head: 1-1/4"
Height: 1/4"
Electron Microscopy Sciences Metallurgical Mount Holder 1" and 30 mm, 3.2 mm x 8mm Pin
This mount holder which is made from machined aluminum with stainless steel Allen screws. Desgned specifically for use with 1 1/4" and 30 mm metallurgical mounts.
Type: 3.2 mm x 8 mm Pin
Electron Microscopy Sciences EMS Molybdenum Aperture with 40 µm hole, 2 mm O.D., 0.53 mm thick
Molybdenum disc aperture with 40 um hole for use with Cambridge, Siemens, JEOL, and Cameca electron microscopes.
O.D.: 2 mm
Thickness: 0.53 mm
Electron Microscopy Sciences EMS Molybdenum Aperture with 150 µm hole, 3 mm O.D., 0.24 mm thick
O.D.: 3 mm
Thickness: 0.24 mm
Electron Microscopy Sciences JEOL SEM Cylinder Mount 1-1/4" surface, 3/16" height, Aluminum
Cylinder specimen mounts are for use with JEOL scanning electron microscopes. The mounts are made from ultra-pure aluminum with a standard lathe finish.
Head: 1-1/4"
Height: 3/16"
Electron Microscopy Sciences Multi Holder for 8 Pins, Hitachi M4
This 50 mm in diameter multi pin holder is designed to save time.It is made from machined aluminum with stainless steel Allen wrench screws. It accommodates up to eight standard 12.7 mm (1/2") pin stubs.
Type: Hitachi M4
Electron Microscopy Sciences Metallurgical Mount Holder 1.5" and 40 mm, 3.2 mm x 8mm Pin
This set screw vice which is made from machined aluminum with stainless steel allen set screws has an open slot that is 10 mm (.394") wide x 5 mm (.197") deep. It measures 25 mm (1”) dia. x 17.5 mm (0.69”) high.
Type: 3.2 mm x 8 mm Pin
Electron Microscopy Sciences Geological Thin Section Holder Hitachi M4
This thin section holder is made from aluminum with copper clips and brass screws. The unit measures 55x30x8 mm and holds a standard geological thin section or slide measuring 47 x 27 mm. The holder comes complete with 2 clips to insure nothing moves. The holder has convenient tweezer inserts which allow for easy loading.